A Brüel & Kjær noise monitoring microphone (visible logo on instrument body) is mounted on a post beside an airport runway, with a Southwest Airlines Boeing 737 on approach to land. The setup appears to document aircraft noise levels at an airport location, consistent with a noise monitoring station.

Notes

Image showing a commercial aircraft approaching for landing with airport ground equipment visible in the foreground on a grassy field. The photo appears to be taken at an airport during daytime with clear skies.

Sidebar On/Off

As the source for federal transportation grants, the Puget Sound Regional Council was charged with developing a system to meet the growing need for commercial aviation. When the search for a second airport failed, they authorized the Port of Seattle to build the Third Runway, with a mandate to develop a noise abatement and mitigation program. In their effort to stop the Third Runway, the ACC argued over every detail of the Port's efforts--including property buyouts and sound insulation. The dispute was meant to be settled by a three member Expert Arbitration Panel. This is their final report. It finds 2-1, that the Port's program was insufficient in several respects. Despite that, funding for the Third Runway was approved by the PSRC, and the 'Port Package' program, proceeded largely unchanged. Expert Arbitration Panel's final decision finding that the Port of Seattle had not shown sufficient reduction in real on-the-ground noise impacts to satisfy noise reduction conditions required for approval of a third runway at Sea-Tac International Airport. The majority decision concluded the Port's noise abatement programs were insufficient despite being impressive in scope.

continue...

V V

Notes

Message